top of page
Busselton Airport 93_07.07_edited.jpg

Busselton Margaret River Airport Sewer Upgrade

A comprehensive wastewater infrastructure upgrade delivered in a challenging operational environment

Craneford Plumbing successfully delivered a major sewer and wastewater infrastructure upgrade at Busselton Margaret River Airport, working closely with the City of Busselton and airport management to replace ageing infrastructure and provide a modernised wastewater treatment and disposal solution.

​

The project brought together civil, plumbing, wastewater treatment and specialist underground works, including the installation of two FujiClean CV10 wastewater treatment systems and the decommissioning of the site's existing Biomax systems.

​

Delivered within an operating airport environment, the project required careful planning, staged construction and close coordination to minimise disruption to airport operations.

PROJECT

Busselton Margaret River Airport Sewer Upgrade

LOCATION

Busselton, Western Australia

CONTRACTOR

Craneford Plumbing

WASTEWATER TREATMENT

2 × FujiClean CV10 systems

CLIENT

City of Busselton and Busselton Margaret River Airport

PROJECT STATUS

Completed

THE PROJECT

Upgrading Critical Wastewater Infrastructure

Craneford Plumbing has worked closely with the City of Busselton and Busselton Margaret River Airport management over a number of years to maintain the existing wastewater infrastructure and identify the need for a comprehensive long-term upgrade.

The existing wastewater infrastructure required a more reliable and practical solution to address the limitations of the previous system and support the airport's ongoing operational requirements.

 

Craneford Plumbing was involved in the development of the wastewater management solution, including preparation and submission of the required health applications.

Following the necessary approvals from local and State health authorities, the project proceeded to tender.

​

In March 2026, Craneford Plumbing was successful in securing the approved scope of works through a competitive tender process and commenced construction.

Busselton Airport 33_28.04_edited.jpg

DELIVERING THE UPGRADE

Complex Works Within an Operating Airport

The project involved a combination of civil, plumbing, wastewater and specialist installation works.

​

One of the key challenges was delivering the works within an operating airport environment while maintaining appropriate separation from ongoing airport operations.

​

The new flatbed leach drain area was required to be constructed on airside land. Craneford Plumbing carefully planned the work area and securely fenced and isolated the construction footprint within the allocated airside area.

​

This enabled construction to proceed while maintaining the required separation from airport operations.

​

Before underground works commenced, comprehensive ground scanning and service locating was undertaken to identify existing underground infrastructure and reduce the risk of service conflicts or damage.

​

Careful planning, communication and coordination were essential to successfully managing these site constraints.

MAJOR WORKS

A Complete Sewer Infrastructure Upgrade

​

​The project incorporated a broad range of works across the airport's wastewater infrastructure.

​Major components included:

Construction of the approved flatbed leach drain area.

Installation and connection of two FujiClean CV10 wastewater treatment systems.

Extension of the existing sewer rising main.

Works associated with the existing sewer pump station terminal.

Upgrade works to Sewer Pump Station No. 1 on Neville Hyder Drive.

Decommissioning of the existing Biomax wastewater treatment systems.

Final connection of the upgraded wastewater infrastructure.

Testing, commissioning and certification.

Underground boring for the installation of new services.

The combination of these works provided a coordinated upgrade of the airport's wastewater treatment and disposal infrastructure rather than simply replacing individual components.

FUJICLEAN CV10 INSTALLATION 

A Customised Containerised Wastewater Treatment Solution

​​​

A key component of the project was the installation of two FujiClean CV10 wastewater treatment systems.

​

The systems were designed for above-ground installation and incorporated into two customised sea containers.

​

Craneford Plumbing modified the containers to provide suitable housing and protection for the treatment equipment while maintaining practical access for operation, inspection and ongoing maintenance.

THE CONTAINERISED ARRANGEMENT INCORPRATED:

Roof access for servicing.

Dedicated locations for electrical components.

Practical access to the treatment equipment.

Protection for the wastewater treatment systems.

A maintainable arrangement suited to the airport environment.

This customised approach provided a practical solution for the site's particular space, access and operational requirements.

​

The installation also allowed the new treatment systems to be incorporated into the broader sewer infrastructure upgrade in a controlled and coordinated manner.

REPLACING THE EXISTING BIOMAX SYSTEMS

A Carefully Staged Transition

An important part of the project was the decommissioning of the existing Biomax wastewater treatment systems.

​

The previous systems had failed or were no longer considered workable for the site's requirements.

​

Rather than removing the existing systems before the replacement infrastructure was ready, Craneford Plumbing carefully staged the works.

The new FujiClean CV10 systems were installed, connected and commissioned before the existing Biomax systems were fully removed from service.

​

This sequencing helped maintain wastewater services to the airport and minimise disruption to airport facilities and ongoing operations during the transition.

WORKING AIRSIDE

Planning for Safety, Access and Continuity

Working within an operational airport presented a number of unique logistical and construction challenges.

​

The project required Craneford Plumbing to manage:

Airside Construction

Works were undertaken within a controlled airside footprint with appropriate fencing and separation from airport operations.

Existing underground services
Ground scanning and service locating were completed before underground works commenced.

Ongoing airport operations
Construction activities were coordinated around the operation of the airport to minimise disruption.

New and existing infrastructure
The new wastewater treatment systems needed to be integrated with existing sewer infrastructure as part of the wider upgrade.

Continuity of wastewater services
The works were staged to support continuity of wastewater services during the transition from the existing systems to the new infrastructure.

​Through careful planning, communication and coordination with the City of Busselton and airport management, Craneford Plumbing successfully managed these challenges throughout construction.

COMPLETION & COMMISSIONING

From Construction Through to Final Certification

Following completion of the installation works, the upgraded wastewater infrastructure was connected and the two FujiClean CV10 treatment systems were commissioned.

​

Final testing, commissioning and certification activities were completed to confirm that the upgraded system was operating as designed and in accordance with the approved requirements.

​

The successful completion of the project provides Busselton Margaret River Airport with an upgraded wastewater treatment and disposal system designed to address the limitations of the previous infrastructure and support the site's long-term operational requirements.

IMG_0856_edited.jpg

PROJECT OUTCOMES

A Modernised Wastewater Solution

The completed project has delivered a comprehensive upgrade to the airport's wastewater infrastructure.

1

Upgraded Treatment Infrastructure

Two new FujiClean CV10 wastewater treatment systems were installed and integrated into the upgraded sewer system.

2

Replacement of Existing Systems

The previous Biomax wastewater treatment systems were decommissioned and replaced as part of the upgrade.

3

Improved Accessibility

The customised containerised arrangement provides practical access for inspection, servicing and maintenance.

4

5

6

Integrated Sewer Upgrade

The project incorporated wastewater treatment, sewer rising main, pump station, underground service and leach drain works.

Minimise Operational Disruption

Staged construction and commissioning allowed the transition to the new infrastructure to be managed while maintaining continuity of airport operations.

Long-Term Infrastructure Improvement

​The completed works provide a modernised wastewater treatment and disposal solution designed to support the airport's ongoing requirements.

PROJECT GALLERY

Behind the Project

PROJECT PARTNERSHIP

Working Together to Deliver a Complex Infrastructure Upgrade

The successful delivery of the Busselton Margaret River Airport Sewer Upgrade was the result of close coordination between Craneford Plumbing, the City of Busselton and Busselton Margaret River Airport management, together with specialist project suppliers and stakeholders.

​

Craneford Plumbing managed the delivery of the approved works across a range of disciplines, coordinating civil, plumbing, wastewater treatment and underground service activities within the constraints of an operating airport.

​

The project demonstrates Craneford Plumbing's capability to deliver complex wastewater and sewer infrastructure projects where careful planning, technical knowledge and effective stakeholder coordination are critical to successful project outcomes.

CRANEFORD PLUMBING

Experienced in Complex Plumbing & Wastewater Infrastructure

From sewer upgrades and wastewater treatment installations to complex projects in operational environments, Craneford Plumbing provides practical project delivery backed by experience, planning and technical capability.

​

Planning a sewer, wastewater or commercial plumbing project? Talk to Craneford Plumbing about your project requirements.

bottom of page